Circulating Water Cooling and Heating Constant Temperature System

Circulating Water Cooling and Heating Constant Temperature System

Introduction

Water Constant Temperature - Circulating Water Cooling and Heating Constant Temperature System. The heating method utilizes heat from the air to warm the water, eliminating the need for additional heating elements. In this era of environmental conservation and energy efficiency, this unit fully meets market demands..

Unit Cooling Principle

The compressor operates, converting low-temperature, low-pressure gaseous refrigerant into high-temperature, high-pressure gaseous refrigerant, which enters the condenser. Part of the heat from the refrigerant inside the condenser is expelled by external cooling water or cooling fans. The refrigerant releases heat and liquefies into a high-temperature, high-pressure liquid, which then flows through a dryer filter for drying and filtration. It then enters the expansion valve for throttling (a rapid cooling process) and pressure reduction. The refrigerant liquefies into a low-temperature, low-pressure liquid and enters the evaporator for heat exchange. The low-temperature, low-pressure liquid refrigerant absorbs heat from the surrounding medium (water, oil) outside the evaporator. During the heat absorption process, the refrigerant temperature remains constant while its volume changes. The low-pressure hydraulic refrigerant, after absorbing heat, vaporizes into a low-temperature, low-pressure gaseous refrigerant and enters the compressor. After compression by the compressor, it becomes a high-temperature, high-pressure gas and enters the condenser, thus completing the entire refrigeration cycle.

Unit Heating Principle

Based on the refrigeration principle, the compressor operates, converting low-temperature, low-pressure gaseous refrigerant into high-temperature, high-pressure gas, which passes through a four-way valve and a liquid storage tank. The refrigerant enters the condenser, where the heat inside is utilized to heat the water tank, with heated water reaching up to 90 degrees Celsius. The refrigerant releases heat and liquefies into a high-temperature, high-pressure liquid, which then flows through a dryer filter for drying and filtration. It then enters the expansion valve for throttling (a rapid cooling process) and pressure reduction. The refrigerant liquefies into a low-temperature, low-pressure liquid and enters the evaporator for heat exchange. The low-temperature, low-pressure liquid refrigerant absorbs heat from the surrounding medium (water, oil) outside the evaporator. During the heat absorption process, the refrigerant temperature remains constant while its volume changes. The low-pressure hydraulic refrigerant, after absorbing heat, vaporizes into a low-temperature, low-pressure gaseous refrigerant and enters the compressor. After compression by the compressor, it becomes a high-temperature, high-pressure gas and enters the condenser, thus completing the entire heating cycle.

Features

The Circulating Water Cooling and Heating Constant Temperature System has eight major protection devices:1. Phase loss and reverse phase protection device; 2. Motor overload protection device; 3. High and low pressure protection device; 4. Automatic water shortage alarm device; 5. Low temperature and anti-freezing protection device; 6. Coil overheating protection device; 7. Insufficient water flow protection device; 8. Fully automatic temperature control system

Unit Performance

The unit is entirely manufactured using original components supplied by reputable brands recognized in the market, ensuring stable performance and continuous operation of this series.

Control System

1. Control components, microcomputer boards, single modules, PLCs, etc., use brands such as LG, Bopu, Siemens, Schneider, Mitsubishi, all of which are market-recognized brands.

2. To enhance the stability and safety of the Circulating Water Cooling and Heating Constant Temperature System during use, the EU quality management system certification has been actively implemented in the production process. Strict control over product quality is maintained in supplier selection, and load specifications are rigorously standardized. The unit's performance includes additional protection devices such as phase loss and reverse phase protection, motor overload protection, high and low pressure protection, automatic water shortage alarm, low temperature and anti-freezing protection.

After-Sales Service

1.One-year free warranty, lifetime maintenance (excluding human factors, consumables, and force majeure),

2.Upon receiving written equipment repair notification from the customer, response and on-site repair within 36 hours within Guangdong Province, and 72 hours outside Guangdong Province.

3.After the warranty period, a separate service agreement can be arranged to ensure effective protection during the customer's production process.

4.During the warranty period, if equipment failure is caused by product quality (excluding human factors), all costs will be borne by our company.

5.Outside the warranty period, costs incurred for equipment maintenance will be charged based on actual expenses.

Unit Technical ParametersAir energy water refrigeration heating machine set Technical Parameters

7482

120000

Note: 1. Refrigeration compressor: Supports a maximum temperature of 45°C, uses refrigerant R22. Refrigeration compressor: Support highest temperature  45 ℃、Refrigerant R22 for use.

2. Screw unit energy automatic control is 75%-50%-25%. Screw water chillers energy automatic control for 75%-50%-25% 。

3. Evaporation temperature inlet water 12°C, evaporation temperature outlet water 7°C. Condensation temperature inlet water 30°C, condensation temperature outlet water 35°C. Evaporation temperature into the water 12 ℃、Evaporation temperature water 7 ℃、Cooling water temperature into 30 、Cooling water temperature for 35。

4. The above parameters are subject to change without prior notice. The above parameters are subject to change without prior notice.